Alper Bideci | Building Materials | Editorial Board Member

Published on by Fiber-Reinforced Polymer

Assoc. Prof. Dr. Alper Bideci | Building Materials | Editorial Board Member

Architecture | Düzce University | Turkey

Assoc. Prof. Dr. Alper Bideci is a leading researcher in construction materials, recognized for his extensive contributions to lightweight concrete technology, polymer-coated aggregates, sustainable building materials, and the performance optimization of cement-based composites. His scholarly work spans mechanical behavior, thermal performance, durability enhancement, fracture energy, shrinkage, creep, and microstructural characterization of advanced concretes, supported by experimental testing and image-processing-based evaluation methods. Dr. Bideci has published numerous high-impact articles in SCI-Expanded journals, including significant studies on polyester-coated pumice aggregates, fiber-reinforced calcium aluminate concrete under elevated temperatures, homogeneity assessment in EPS-integrated mortars, environmental performance of insulated façade panels using life cycle assessment, and the influence of hemp fibers, waste tyre additives, and polymer modifications on strength and fracture properties. His investigations have advanced understanding of eco-efficient composites, permeability control, color and structural homogeneity, and the integration of industrial by-products in construction materials. Dr. Bideci’s research additionally encompasses polymer coatings for lightweight aggregates, the structural behavior of self-compacting concretes containing waste materials, and performance assessments of historical brick and concrete systems through experimental methods. He has led and contributed to funded research projects on polymer-coated aggregates and historical building materials and has achieved substantial international recognition, with over 350 citations reflecting his global impact. His consistent achievements have been honored repeatedly with the Scientific Encouragement Awards of the Scientific and Technical Research Council of Turkey (TÜBİTAK), recognizing his sustained advancements in high-performance, durable, and sustainable construction materials.

Profile: Scopus | Google Scholar

Featured Publications

Bideci, A., Sallı Bideci, Ö., & Ashour, A. (2023). Mechanical and thermal properties of lightweight concrete produced with polyester-coated pumice aggregate. Construction and Building Materials, 394.

Sallı Bideci, Ö., Yilmaz, H., Gencel, O., Bideci, A., Çomak, B., & Nodehi, M. (2023). Fiber-reinforced lightweight calcium aluminate cement-based concrete: Effect of exposure to elevated temperatures. Sustainability, 15, 4722.

Çomak, B., Aykanat, B., Sallı Bideci, Ö., Bideci, A. (2022). Determination of homogeneity index of cementitious composites produced with EPS beads by image processing techniques. Computers and Concrete, 29, 107–115.

Çomak, B., Bideci, A., Aykanat, B., & Sallı Bideci, Ö. (2021). Determination of color homogeneity by image processing in cement-based mortars. Romanian Journal of Materials, 51, 552–557.

Yılmaz, E., Arslan, H., & Bideci, A. (2019). Environmental performance analysis of insulated composite facade panels using life cycle assessment (LCA). Construction and Building Materials, 202, 806–813.

Efty Mahmud | Biodegradable Composites | Best Researcher Award

Published on by Fiber-Reinforced Polymer

Mr. Efty Mahmud | Biodegradable Composites | Best Researcher Award

Mr. Efty Mahmud | Khulna University of Engineering & Technology | Bangladesh

Efty Mahmud is a Bangladeshi researcher and textile engineer from Burichong, Comilla. He earned his Bachelor of Science in Textile Engineering from Khulna University of Engineering & Technology (KUET) , majoring in Apparel Manufacturing Engineering with a CGPA of 3.13. His research focuses on advanced composite materials, sustainable biocomposites, and computational modeling. For his undergraduate thesis, he developed a novel polylactic acid (PLA) and jute fiber bio-composite reinforced with eggshell particle fillers, combining experimental and fuzzy logic modeling approaches to optimize mechanical and sustainable performance. Efty has authored and co-authored several research papers published or under review in reputed journals, including Results in Materials (Elsevier). He was an invited keynote speaker at the International Conference on Oil, Gas & Petroleum Engineering in Kuala Lumpur and has contributed to book chapters with Wiley–Scrivener Publishers (USA). Technically proficient in AutoCAD, SolidWorks, MATLAB, Python, and machine learning libraries, he applies data-driven modeling to material design. His achievements include a nomination for the Best Researcher Award 2025 by the International Research Awards on Fiber Reinforced Polymer and a Board Scholarship for academic excellence. As Office Secretary of the KUET Textile Club, he organized national events and led academic development initiatives. He also developed the “KuetTexbot” notes-sharing app. Fluent in Bengali and English, Efty continues to pursue innovative, sustainable solutions in textile and composite engineering.

Profile: Scopus  | ORCID

Featured Publications

Mahmud, E. (2025). Fabrication of PLA bio-composite reinforced with jute fiber and ESP fillers and optimization of mechanical properties via fuzzy logic approach. Results in Materials, Elsevier.

Zina Vuluga | Polymer Composites and Nanocomposites | Best Researcher Award

Published on by Fiber-Reinforced Polymer

Dr. Zina Vuluga | Polymer Composites and Nanocomposites | Best Researcher Award

Senior Researcher at National Institute for Research & Development in Chemistry and Petrochemistry—ICECHIM Bucharest, Romania

Dr. Zina Vuluga is an esteemed Romanian chemical engineer and senior scientist, currently affiliated with the National Institute for Research and Development in Chemistry and Petrochemistry (ICECHIM). With over four decades of extensive experience in polymer science, she has made significant contributions to the development of polymer composites and nanocomposites. Throughout her prolific career, she has held several leadership roles, including Chief of the Polymer Modification Department and President of the Scientific Council at ICECHIM. Her work spans industrial and biomedical applications, with notable impact in advancing environmental sustainability through innovative materials research.

Profile

Orcid | Scopus

Education

Dr. Vuluga earned her degree in Chemical Engineering in 1980 from the Faculty of Chemical Technology, University “Politehnica” of Bucharest. She continued her academic journey with specialized management training in 1981 and a postgraduate certificate in process modeling and simulation in 1995. She achieved her Ph.D. in Chemical Engineering in 2004 with a dissertation focusing on “Thermoplastic Composites (at nanometre scale),” awarded by the same university.

Professional Experience

Starting her career at ILV Policolor (1980–1982), Dr. Vuluga gained hands-on experience in paint and varnish technologies. Since 1982, she has been deeply rooted in ICECHIM, serving in various capacities such as engineer, team leader, and vice president of the scientific and administrative councils. Between 2012 and 2023, she led the Polymer Composites and Nanocomposites Team. Her work emphasizes the development of hybrid nanocomposites, antistatic and biodegradable materials, and nanofillers for industrial and biomedical applications.

Research Interests

Dr. Vuluga’s research centers on polymer-based nanocomposites, particularly focusing on the development of environmentally friendly materials with high-performance properties. Her areas of expertise include smart and biodegradable composites, bio-based nanostructured materials, collagen-based systems, and renewable nanomaterials. She is also known for her pioneering work in developing “intelligent” hybrid nanocomposites for drug delivery systems and in regenerative medicine applications, particularly bone implants.

Awards and Recognitions

Dr. Vuluga’s scientific excellence has been widely recognized. She received awards from the Romanian Executive Agency for Higher Education, Research, Development and Innovation Funding (UEFISCDI) for her impactful ISI publications and patents. In 2023, she was honored with an honorary diploma by the Romanian Chemical Society on its centennial celebration. Her dedication to research and innovation continues to set a benchmark in her field.

Selected Publications 

  1. Panaitescu D.M., Vuluga Z., et al. “High flow polypropylene/SEBS composites reinforced with differently treated hemp fibers,” Composites Part B, 2019, FI=6.864. Cited by: 63 articles

  2. Vuluga Z., et al. “Morphological and Tribological Properties of PMMA/Halloysite Nanocomposites,” Polymers, 2018. FI=2.935. Cited by: 51 articles

  3. Vuluga Z., et al. “Properties of Recycled Polypropylene and Industrial Waste Composites,” Polymers, 2023, 15, 2545. Cited by: 19 articles

  4. Vuluga Z., et al. “Scratch Resistance of Polymethylmethacrylate Composites,” Polymers, 2021, 13, 3560. Cited by: 42 articles

  5. Albu M.G., Vuluga Z., et al. “Morphology and Thermal Stability of Bacterial Cellulose/Collagen Composites,” Central Eur. J. Chem., 2014, 12(9). Cited by: 47 articles

  6. Corobea M.C., Vuluga Z., et al. “Novel Nanocomposite Membranes from Cellulose Acetate and Clay-Silica Nanowires,” Polym. Adv. Technol., 2016. FI=1.823. Cited by: 36 articles

  7. Panaitescu D.M., Vuluga Z., et al. “Effect of SEBS on Morphology of PP/Organoclay Nanocomposites,” Polymer Bulletin, 2012. Cited by: 29 articles

Conclusion

Dr. Zina Vuluga exemplifies research excellence and leadership in chemical engineering, particularly in polymer and nanocomposite materials. Her holistic contributions—ranging from innovative biodegradable solutions to cutting-edge applications in automotive and biomedicine—highlight her as a leader who bridges academic insight with practical impact. Given her outstanding scholarly output, extensive project management experience, international collaboration, and notable awards, she is a highly suitable and deserving candidate for recognition through the Award Nomination.