Sophia Immanuel | Textile-Reinforced Concrete | FRP Product Development Excellence Award

Published on by Fiber-Reinforced Polymer

Mrs. Sophia Immanuel | Textile-Reinforced Concrete | FRP Product Development Excellence Award

Research Scholar| National Institute of Technology, Tiruchirappalli|India

Mrs. Sophia Immanuel is an enthusiastic and highly motivated researcher in Textile-Reinforced Concrete with strong expertise in structural engineering and sustainable construction materials. She holds a Bachelor of Engineering in Civil Engineering from 2011 to 2015, followed by a Master of Technology in Structural Engineering with excellent academic performance, and a Doctor of Philosophy focused on advanced composite materials from 2022 to 2025. Additionally, she pursued an MBA in Human Resource Management through correspondence between 2020 and 2022. Her research expertise covers Textile-Reinforced Concrete, fibre reinforced composites, impact dynamics, structural dynamics, and magnetorheological dampers for seismic-resistant structures. Sophia has significant experimental experience in tensile behaviour of TRC composites, coir fibre characterization, tensile testing of Textile-Reinforced Concrete, and has received training in Digital Image Correlation technology. Her professional journey includes roles as a Project Intern at Flinders University, Assistant Professor (Guest) at Dr. B. R. Ambedkar Institute of Technology where she also served as NBA Coordinator and Faculty Advisor, and Project Officer at IIT Madras in the BTCM division. She has taught key structural engineering subjects to undergraduate students and was recognized with the Best Faculty Award in 2018. Sophia has published impactful research articles in reputed international journals such as Elsevier and Springer, contributing to the advancement of innovative TRC systems and sustainable low-cost housing. Proficient in tools like MATLAB, ABAQUS, AutoCAD, and Python basics, she continues to build strong collaborations with leading researchers while upholding integrity, dedication, and a deep sense of responsibility in her scientific pursuits.

Featured Publications

Immanuel, S., & Baskar, K. (2025). Low-velocity impact induced damage and dynamic response of two-way textile reinforced concrete slabs. Structures, 80, 110164.

Immanuel, S., & Baskar, K. (2025). Investigating the effect of textile layers on the flexural response of textile reinforced concrete panels. Structures, 71, 1108112.

Immanuel, S., O., Aniket, Baskar, K., & Arun, M. (2023). A state-of-art review on the mechanical performance of basalt textile reinforced concrete (BTRC). The Journal of Mechanics of Materials and Structures, 18(4), 593–618.

Immanuel, S., & Baskar, K. (2023). A state-of-the-art review on sustainable low-cost housing and application of textile reinforced concrete. Innovative Infrastructure Solutions, 8(1), 1–16.

Immanuel, S., & Kaliyamoorthy, B. (2023). Comparative study on the flexural behavior of BTRC and CTRC panels. In Structural Engineering Convention (pp. 569–579). Springer Nature Singapore.

Cruze, D., Gladston, H., Immanuel, S., Loganathan, S., Dharmaraj, T., & Solomon, S. M. (2018). Experimental investigation on magnetorheological damper for RCC frames subjected to cyclic loading. Advances in Civil Engineering Materials, 7(3), 413–427.

Lysa Benaddache | Civil Engineering | Best Researcher Award

Published on by Fiber-Reinforced Polymer

Mrs. Lysa Benaddache | Civil Engineering | Best Researcher Award

Mrs. Lysa Benaddache | University Of Bordj Bou Arreridj | Algeria

Lysa Benaddache is a PhD student jointly affiliated with the LIMEEDD Laboratory, Department of Civil Engineering, Mohamed El-Bachir El-Ibrahimi University of Bordj Bou Arreridj in Algeria, and the L2MGC Laboratory at CY Cergy Paris Université in France. She holds a Master’s degree in Hydraulic Constructions and Developments and is currently engaged in doctoral research focusing on the development of sustainable eco-composite materials for the repair and strengthening of concrete structures under the effects of climate change. she has also served as a part-time lecturer, contributing to academic teaching and the supervision of final-year projects. Her research integrates areas such as reinforced concrete corrosion, eco-material design, and geopolymer technology aimed at sustainable structural repair. With an h-index of 3 on Scopus and seven published journal articles, her scientific contributions emphasize the use of natural fibers, industrial waste, and biowaste in developing eco-friendly alternatives to synthetic composites. Her studies demonstrate that certain natural fibers can match or even surpass the mechanical properties of traditional glass fibers, enhancing structural durability and sustainability. She is an active member of both the LIMEEDD and L2MGC laboratories, collaborating on innovative research in fiber-reinforced eco-composites, particularly focusing on optimizing date palm fiber treatment to improve mechanical performance and environmental resilience. Dedicated to advancing sustainable construction materials, Lysa Benaddache’s research contributes significantly to eco-innovation and the future of resilient infrastructure systems.

Profile:  Scopus | Google Scholar

Featured Publications

Benaddache, L., Belkadi, A. A., Berkouche, A., Hadzima-Nyarko, M., et al. (2025). Modeling and optimization for the combined valorization of calcined sediments and ground blast-furnace slag in eco-mortar formulations: Rheological, mechanical, microstructural, and environmental assessments. Structures.

Benaddache, L., Belkadi, A. A., Berkouche, A., Aggoun, S., et al. (2025). Advancing structural flexural reinforcement with natural and synthetic fiber composites: Optimization of EBR and EBROG methods supported by DIC. Structures.

Berkouche, A., Belkadi, A. A., Benaddache, L., Aggoun, S., et al. (2025). Enhancing physical, mechanical, and durability properties of slag-based geopolymers through ceramic waste incorporation: A comprehensive optimization study. Journal of the Taiwan Institute of Chemical Engineers.

Benaddache, L., Belkadi, A. A., Berkouche, A., Amziane, S., Alomayri, T., Achour, Y., & Benammar, A. (2024). Experimental optimization of low-carbon cellular foam geopolymers incorporating crushed stone sand and flax fiber using central composite design. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 4, 3999–4019.

Benaddache, L., Belkadi, A. A., Kessal, O., Tayebi, T., & Aggoun, S. (2024). Comparative study on externally bonded heat-treated jute and glass fiber reinforcement for repair of pre-cracked high performance concrete beams.

Mostafa Hassani Niaki | Polymer concrete | Best Researcher Award

Published on by Fiber-Reinforced Polymer

Dr. Mostafa Hassani Niaki | Polymer concrete | Best Researcher Award

Research associate at University of Mazandaran, Iran

Dr. Mostafa Hassani Niaki is a distinguished researcher and mechanical engineer specializing in applied design, composites, and polymer concrete. With a strong foundation in mechanical engineering, he has contributed extensively to material characterization, deep learning applications in composites, and the development of high-strength construction materials. His research integrates artificial intelligence with experimental mechanics, enhancing the understanding of polymer composites and nanocomposites.

profile

scopus

Education

Dr. Niaki earned his Ph.D. in Mechanical Engineering (Applied Design) from Semnan University in 2017, focusing on the synthesis and mechanical improvement of polymer concrete composites with nanomaterials. He completed his M.S. at Islamic Azad University of Semnan, where he optimized and designed a novel micro/nano gripper. His B.S. in Mechanical Engineering (Solid Mechanics) was obtained from the University of Mazandaran, where he analyzed artificial knee mechanisms.

Experience

Dr. Niaki currently serves as a Research Associate at Mazandaran University, focusing on advanced mechanical materials and AI applications in composites. He is the Managing Director of Teb Gostar Daris, overseeing the development of innovative mechanical solutions. His previous roles include Planning Manager at Atipay Medical Co. and Sales Manager at Nam-Avaran Atieh Salamat, where he contributed to strategic development and product innovation in the medical and engineering sectors.

Research Interests

His research explores artificial intelligence in composite materials, particularly deep neural networks for predicting mechanical properties. He specializes in polymer and nanocomposite reinforcement, optimizing mechanical and thermal characteristics. His expertise extends to experimental mechanics, MEMS, and mechanical design, integrating CAD and finite element analysis to advance structural composites and micro-actuation technologies.

Awards & Recognitions

Dr. Niaki has received an Elsevier Certificate of Reviewing for his contributions to the Journal of Building Engineering, a Q1 journal with a high impact factor. He holds multiple technical certifications, including ISO 9001:2008 and SolidWorks Mechanical Design. His research has influenced industrial applications, earning recognition for innovation in polymer concrete and fracture mechanics.

Publications

Dr. Niaki has authored numerous high-impact journal articles and a book on advanced polymer concretes. Below are some of his key publications:

Niaki, M. H. (2024). “Implementation of Deep Learning Method to Determine Dimensionless Values of Stress Intensity Factors and T-Stress of ENDB Specimen.” Fatigue & Fracture of Engineering Materials & Structures.

Niaki, M. H., Moghadasi, R., Ramzali, M. (2024). “Mechanical and Electronic Behavior of TMDC Nanotubes and Monolayers: Molecular Simulations.” Molecular Simulation/Journal of Experimental Nanoscience.

Niaki, M. H., Abedi, S. H., Ahangari, M. G. (2024). “Mechanical, Thermal, and Morphological Studies of POSS Reinforced PA6/NBR Composites.” Polymer-Plastics Technology and Materials.

Niaki, M. H., Aghdam, A. A. (2023). “Effect of Basalt Fibers on Fracture Properties of Nanoclay Reinforced Polymer Concrete After Elevated Temperatures.” Journal of Building Engineering.

Niaki, M. H., Pashaian, M. (2023). “Predicting Geometry Factors and Normalized T‐Stress of Cracked Disk Specimens Using Deep Learning.” Fatigue & Fracture of Engineering Materials & Structures.

Niaki, M. H., Ahangari, M. G., Pashaian, M. (2023). “Experimental Assessment of Deep Learning in Predicting Mechanical Properties of Polymer Composites.” Journal of Building Engineering.

Niaki, M. H. (2022). “A Material-Independent Deep Learning Model to Predict the Tensile Strength of Polymer Concrete.” Composites Communications.

Conclusion

Dr. Mostafa Hassani Niaki is a highly accomplished researcher whose work in mechanical engineering, materials science, and artificial intelligence applications in composites has had a significant impact. His extensive publication record, innovative research, academic mentorship, and industrial contributions make him a deserving candidate for the Best Researcher Award. His contributions continue to push the boundaries of engineering and materials science, making him a worthy recipient of this prestigious recognition.